AF04
Semi-automatic three chamber system for various maintenance cleaning tasks
Semi-automatic three chamber system with AirFlow® turbulence air-in-immersion technologyCleans: Cleans carriers, pallets and condensation filters and machine parts
Usable process chamber dimensions (cleaning): W 580 • D 610 • H 470 mm
Usable process chamber dimensions (Rinsing): W 200 • D 610 • H 470 mm
Usable process chamber dimensions (Drying): W 380 • D 610 • H 470 mm
more about AF04
AF20
Fully automatic air-in-immersion system for maintenance cleaning
Fully automatic system with AirFlow® turbulence air-in-immersion technologyCleans: Condensation traps, solder-frames, carriers and machine parts
Usable process chamber dimensions: W 800 • D 430 • H 500 mm
more about AF20
AF30
Fully automatic air-in-immersion system for maintenance cleaning
Cleaning in the entire chamber with AirFlow® air-in-immersion technologyCleans: Condensation traps, solder-frames, carriers and machine parts
Usable process chamber dimensions: W 1,300 • D 450 • H 590 mm
more about AF30
AF75
Fully automatic large-scale air-in-immersion system for maintenance cleaning
Large maintenance cleaning device with crane loading Cleans: Condensation traps of virtually all manufacturers as well as carriers, solder frames and pallets
Usable process chamber dimensions: W 705 • D 915 • H 510 mm
more about AF75
Air filter drying
Fine filter unit for dryer air
Filters finest particles from the room air that is sucked by the system for the drying process
more about Air filter drying
AQUBE® LH5
Fully automatic standard ultra-fine cleaning system for assemblies/PCBAs
Capacity: up to 176 (2.8 m² / 30 ft²) standard eurocards in up to two variable drawer basketsHorizontal up to fourfold spray rotors, VMH®-TurboDigital evaporative drying
PolyPower® Technology (up to three times more pressure power and up to 30 % less cycle time)
Process chamber dimensions: W 540 • D 590 • H 570 mm (W 21.25" • D 23.22" • H 22.44")
more about AQUBE® LH5
AQUBE® LH6
Fully automatic ultra-fine cleaning system for assemblies/printed circuit boards
Capacity: up to 246 (3.9 m² /41.9 ft²) eurocards in up to three variable drawer basketsHorizontal PTFE-mounted rotor system with up to six ASYNCHRON® spray rotors for thorough wetting (no blind spots)
PolyPower® Technology (up to three times more pressure power and up to 30 % less cycle time)
Process chamber dimensions: W 540• D 590 • H 710 mm (W 24.26" • D 23.23" • H 27.95")
more about AQUBE® LH6
AQUBE® LH7
Fully automatic standard ultra-fine cleaning system for assemblies/printed circuit boards
Capacity: up to 522 (8.4 m²/90.4 ft²) standard eurocards in up to three variable drawer basketsHorizontal up to sixfold spray rotors, VMH® TurboDigital evaporative drying
PolyPower® Technology (up to three times more pressure power and up to 30 % less cycle time)
Process chamber dimensions: W 700 • D 720 • H 710 mm (W 27.55" • D 28.34" • H 27.95")
more about AQUBE® LH7
AQUBE® MH6
Fully automatic "all-round" tools and parts cleaning system
Capacity: 7 carriers up to 610 x 490 mm (24" x 19") or up to three washing drawersHorizontal PTFE-mounted rotor system with ASYNCHRON® spray rotors for thorough wetting (no blind spots)
Process chamber dimensions: W 540 ▪ D 590 ▪ H 710 mm (W 24.26" ▪ D 23.23" ▪ H 27.95")
more about AQUBE® MH6
AQUBE® MH7
(also available as AQUBE® MH7 TZD)
Fully automatic "all-round" tools and parts cleaning system
Capacity: 11 carriers up to 610 x 640 (24" x 25") or 640 x 640 mm (25" x 25") or up to three washing drawersHorizontal spray rotor system, VMH®-Turbo evaporative drying
PolyPower® technology (up to three times more pressure power and up to 30% less cycle time)
Process chamber dimensions: W 700 • D 720 • H 710 mm (W 27.55" • D 28.34" • H 27.95")
more about AQUBE® MH7
AQUBE® MH9
Superlarge fully automatic "all-round" tools and parts cleaning system
Capacity: 28 carriers up to 750 x 950 mm (29.5" x 37.5") using the washing cart use or up to four washing drawersHorizontal spray rotor system, VMH®-Turbo evaporative drying
Process chamber dimensions: W 970 • D 955 • H 900 mm (W 38.18" • D 37.59" • H 35.43")
more about AQUBE® MH9
AQUBE® MV3 ONE
Compact fully automatic high-end fine cleaning system for stencils/screens
Capacity: Screen, stencil, carrier, washing frame (PCBAs, Misprints, Squeegees) up to 770 x 950 mm (31" x 37")Fully automatic 4-step process, cleaning, MediumWipe®, rinsing and CWA® supercharger drying
Cleans stencils, screens, PumpPrint stencils, misprints from SMD adhesive, SMD paste, flux, oil, dust, grease
more about AQUBE® MV3 ONE
AQUBE® MV8 sTWIN
Twofold screen/stencil fine cleaning system with sequential utilization option
Capacity: 2 Stencils, screens, carriers up to 950 x 770 mm (37" x 30") in two separate process chambersFully automatic 4step process: cleaning, MediumWipe®, rinsing and CWA® supercharger drying
Cleans stencils, screens, PumpPrint stencils, misprints from SMD adhesive, SMD paste, flux, oil, dust, grease
more about AQUBE® MV8 sTWIN
AQUBE® MV9 QUAD
Fully automatic large-scale fine cleaning system for four screens/stencils
Capacity: 4 screens/stencils/carriers up to 800 x 940 (31.5“ x 37")Vertical eightfold spray rotors, CWA® supercharger compression drying
Relative cycle time: 7 minutes per stencil
Process chamber dimensions: W 970 • D 955 • H 900 mm (W 38.18" • D 37.59" • H 35.43")
more about AQUBE® MV9 QUAD
AQUBE® XH6
Fully automatic high-end ultra-fine cleaning system for assemblies/printed circuit boards
Capacity: up to 246 (3.9 m²/41,9 ft²) eurocardsCleans PCBAs, hybrids and misprints from flux residues, resin, copper, oxide and soldering support substances
Process chamber dimensions: W 540 ▪ H 710 ▪ D 590 mm (W 24.26"▪ H 27.95" ▪ D 23.23")
more about AQUBE® XH6
AQUBE® XH7
(also available as AQUBE® XH7 TZD)
Fully automatic high end ultra-fine cleaning system for assemblies/printed circuit boards
Capacity: up to 522 (8.4 m² / 90,4 ft²) eurocards in up to three variable drawer basketsPolyPower® Technology (up to three times more pressure power and up to 30 % less cycle time)
Horizontal up to sixfold spray rotors, VMH® TurboDigital evaporative drying
Process chamber dimensions: W 700 • D 720 • H 710 mm (W 27.55" • D 28.34" • H 27.95")
more about AQUBE® XH7
AQUBE® XH9
Fully automatic high-end ultra-fine cleaning system for mass cleaning of PCBAs
Capacity: up to 900 standard eurocards equals 14.4 m² (155 ft²) in up to four variable drawer baskets Horizontal up to eightfold spray rotors, VMH® TurboDigital evaporative drying
Process chamber dimensions: W 970 • D 955 • H 900 mm (W 38.18" • D 37.59" • H 35.43")
more about AQUBE® XH9
AQUBE® XV7 SuperTask
Special system for cleaning assemblies/printed circuit boards with complex architectures
Capacity: 30 eurocards in two clamping frames of 15 cards each in a washing cartCleans PCBAs, hybrids and misprints from flux residues, resin, copper, oxide and soldering support substances
Process chamber dimensions: W 700 ▪ H 710 ▪ D 720 mm (W 27.55"▪ H 27.95" ▪ D 228.34")
more about AQUBE® XV7 SuperTask
AQUBE® XV9 SuperTask
Fully automatic high-end ultra-fine cleaning system for mass cleaning of PCBAs
Capacity: 96 eurocards in four clamping frames of 24 cardsVertical PTFE mounted rotor system with eight spray rotors for thorough wetting (no blind spots)
Process chamber dimensions: W 970 • D 955 • H 900 mm (W 38.18" • D 37.59" • H 35.43")
more about AQUBE® XV9 SuperTask
Auto Detergent Monitoring (function package)
Inline/online detergent stability monitor
Detergent concentration monitoring/refraction measurement (scale percent brix/% brix) unit to ensure that the cleaning medium is optimally set (not too low or too high concentrated).
more about Auto Detergent Monitoring (function package)
Automatic Additive Dosage
Replenishment unit for detergent additives
Automatic unit for adding a detergent additive to make the permanent mixing ratio in the cleaning tank more process-reliable and to shorten maintenance times.
more about Automatic Additive Dosage
Automatic Water Exchange
Exchange unit for the rinsing tank
Unit for the regular and/or condition-controlled automatic water change of the rinsing tank to optimize the process reliability and minimize downtime due to maintenance of the cleaning system.
more about Automatic Water Exchange
Decalcification unit
Ensuring required water quality for the rinse circuit
The unit provides for a water quality of < 10°dH or < 350 µS conductivity value, required for a thorough and stable rinsing process.
more about Decalcification unit
DeSealing filter insert
Coarse filter for varnish and coating residues
Special filter element, easy to insert, to protect machine filter systems in case of coating carrier cleaning.
more about DeSealing filter insert
Detergent Tank Heater
Unit for precise detergent heating up to max. 80 °C
For cleaning with detergents which develop their optimal cleaning effect only at higher temperatures.
more about Detergent Tank Heater
DI-Water System (function package)
DI-/DM-water supply for the rinsing tank
For the production and quality control of deionized (DI) and demineralized (DM) purified rinse water in the cleaning system.
more about DI-Water System (function package)
DI-Water System Combi (function package)
DI-/DM-water supply for the rinsing tank
For the production and quality control of deionized (DI) and demineralized (DM) purified rinse water in the cleaning system. (including Option Automatic Water Exchange)
more about DI-Water System Combi (function package)
Electronic rotor run control
Electronic monitoring of rotors functioning
As a visual monitoring of the rotors is not possible with closed operating AQUBE® and PSE systems, the rotor run control option checks the functioning of the rotors electronically.
more about Electronic rotor run control
Fine Filter System Tank A (function package)
Filter system for service life extension of the detergent
Exchangeable filter cartridges with different degrees of fineness filter out loads of the cleaning medium such as e.g. heavy metals that were washed off during the cleaning process.
more about Fine Filter System Tank A (function package)
Fine Filter System Tank B (function package)
Filter system for service life extension of the rinsing fluid
Replaceable filter cartridges with different degrees of fineness filter out contaminants such as heavy metals, which are carried in by rinsed-off detergent residues, from the rinsing medium.
more about Fine Filter System Tank B (function package)
FrameWash ModBase SC
Spring wash frame for PCBs
Flexibly adjustable wash frame
more about FrameWash ModBase SC
FrameWash SSF-VGLJ
Drip subframe for kolb washing frames
Special dripping support for kolb washing frames for VectorGuard and Laserjob stencils
more about FrameWash SSF-VGLJ
FrameWash SSQ-EKD
Special washing carrier for the cleaning of squeegees
Especially suited for the cleaning of squeegees from the brands EKRA and DEK. Also available for other brands and types upon request.
more about FrameWash SSQ-EKD
FrameWash SST-LJ2323
Washing frame for LaserJob stencils 23" x 23"
Carrier 23" x 23" especially for frameles lasercut stencils from LaserJob
more about FrameWash SST-LJ2323
FrameWash SST-VG2323
Special washing frame for VectorGuard stencils
Comfortable cleaning carrier especially for VectorGuard stencils 23" x 23"
more about FrameWash SST-VG2323
FrameWash UST-FL2323
Washing frame for frameless stencils 23" x 23"
Universal carrier for stencils size 555 x 555 mm
more about FrameWash UST-FL2323
MediumWipe
Liquid blow off and recirculation technology
Designed to prevent detergent carryover and additional consumption and to extend the service life and quality of the rinse water.
more about MediumWipe
Noise Insulation (function package)
Reduces compressor generated noise to talk volume
Reduction of operating noise at full drying load from approx. 74 dB(A) to approx. 66 dB(A)
more about Noise Insulation (function package)
PCBA Cleaning (function package)
For the cleaning of sensitive electronics
Function package (mainly for upgrading compatible kolb stencil cleaning systems) for qualified PCBA and single-side mounted misprints cleaning.
more about PCBA Cleaning (function package)
PSE 300 HD
Compact fully automatic fine cleaning economy system for stencils/screens
Capacity: Screen, stencil, carrier, washing frame up to 770 x 850 mm (30" x 33")2step process (cleaning/rinsing, drying) with HotSpeed warm air drying
Average process time: 30 min per stencil
more about PSE 300 HD
PSE 300 VL
Compact fully automatic fine cleaning economy system for stencils/screens
Capacity: Screen, stencil, carrier/washing frame up to 780 x 950 mm (31" x 37")3-step process (cleaning/rinsing, MediumWipe®, CWA® drying)
Average process time: 13 min per stencil
more about PSE 300 VL
PSE 300 VS
Fully automatic, single chamber PowerSpray® system with 2-step process
Fully automatic single chamber system with PowerSpray® technologyCleans: screens, stencils, solder carriers and misprints
Usabel chamber dimension: W 350 • D 1,000 • H 920 mm
more about PSE 300 VS
PSE LH5
Fully automatic economy ultra-fine cleaning system for assemblies/printed circuit boards
Capacity: up to 176 equals 2.8m 2 (30 ft 2 ) eurocards in up to two variable drawer basketsHorizontal up to fourfold spray rotors, VMH®-Turbo evaporative drying
Process chamber dimensions: W 540 • D 590 • H 570 mm
more about PSE LH5
PSE LH6
Fully automatic economy ultra-fine cleaning system for assemblies/printed circuit boards
Capacity: 246 (3.9 m2 /41.9 ft2 ) eurocards in up to three variable drawer basketsHorizontal PTFE-mounted rotor system with up to six ASYNCHRON® spray rotors for thorough wetting (no blind spots)
Process chamber dimensions: W 540• D 590 • H 710 mm (W 24.26" • D 23.23" • H 27.95")
more about PSE LH6
PSE LH7
Fully automatic economy ultra-fine cleaning system for assemblies/printed circuit boards
Capacity: up to 520 (8.4 m²/90.4 ft²) eurocards in up to three variable drawer basketsHorizontal up to sixfold spray rotors, VMH® Turbo evaporative drying
Process chamber dimensions: W 700 • D 720 • H 710 mm (W 27.55" • D 28.34" • H 27.95")
more about PSE LH7
PSE MH6
Fully automatic economy cleaning system for solder frames, solder carriers, solder pallets, ESD boxes, PCB magazines, trays, machinery parts
Capacity: 7 carriers up to 610 x 490 mm (24" x 19") or up to three washing drawersHorizontal spray rotor system
Process chamber dimensions: W 540 • D 590 • H 710 mm (W 24.26" • D 23.23" • H 27.95")
more about PSE MH6
PSE MH7
Fully automatic "all-round" economy tools and parts cleaning system
Capacity: 11 carriers up to 610 x 640 mm (24“ x 25“), boxes / racks up to 640 x 640 (25" x 25") mm or up to three drawer baskets for small parts, filters etc.Horizontal spray rotor system, VMH®-Turbo evaporative drying
Process chamber dimensions: W 700 • D 720 • H 710 mm (W 27.55" • D 28.34" • H 27.95")
more about PSE MH7
PSE MV3 ONE
Compact fully automatic fine cleaning economy system for stencils/screens
Capacity: Screen, stencil, carrier, washing frame up to 770 x 950 mm (30" x 37")Fully automatic 4step process, cleaning, MediumWipe®, rinsing and CWA® supercharger drying
Cleans stencils, screens, PumpPrint stencils, misprints from SMD adhesive, SMD paste, flux, oil, dust, grease
more about PSE MV3 ONE
PSE MV3 ONE XL
Compact fully automatic fine cleaning economy system for extra large stencils/screens
Capacity: Screen, stencil, carrier, washing frame up to 770 x 1,560 mm (30" x 61")Fully automatic 4step process, cleaning, MediumWipe®, rinsing and CWA® supercharger drying
Cleans stencils, screens, PumpPrint stencils, misprints from SMD adhesive, SMD paste, flux, oil, dust, grease
more about PSE MV3 ONE XL
PSE MV3 ONE XXL
Economy special system for the fine cleaning of super large stencils
Capacity: Stencil/screen up to 1,500 x 1,560 mm (59" x 61")Fully automatic 4step process, cleaning, MediumWipe®, rinsing and CWA® supercharger drying
Cleans screens and stencils from SMD paste, SMD adhesive, soldering support substances, oil & dust
more about PSE MV3 ONE XXL
PSE MV8 TWIN
Economy fine cleaning system for two large stencils/screens in one cycle
Capacity: 2 Stencils, screens, carriers up to 800 x 900 mm (32" x 35")Fully automatic 4-step process, cleaning, MediumWipe®, rinsing and CWA® supercharger drying
Cleans screens, stencils and PumpPrints from SMD paste, SMD adhesive, soldering support substances, oil & dust
more about PSE MV8 TWIN
Remote Maintenance
Online maintenance assistance
Remote hotline to kolb service engineers for fast software data analysis, maintenance assistance, instructions and monitoring.
more about Remote Maintenance
Rotor QuickConnect
Quick-action rotor clamping system
Rotor connect system for inserting or removing the center horizontal rotor(s) within a few seconds if the cleaning good requires more headroom.
more about Rotor QuickConnect
SlideIn quick load unit 2-fold
Speed loading slide in unit with two drawer baskets
Speed loading unit for comfortable external loading and shortening of machine downtime during loading and unloading
more about SlideIn quick load unit 2-fold
SlideIn quick load unit 3-fold
Speed loading slide in unit with three drawer baskets
Speed loading unit for comfortable external loading and shortening of machine downtime during loading and unloading
more about SlideIn quick load unit 3-fold
SlideIn quick load unit 4-fold
Speed loading slide in unit with four drawer baskets
Speed loading unit for comfortable external loading and shortening of system downtime during loading and unloading
more about SlideIn quick load unit 4-fold
SpeedLoad Carts
Mobile loading aid for Slide-in units
Set-up carts for easy transport and for the precise insertion of kolb Slide-in units into the chamber of the cleaning system.
more about SpeedLoad Carts
Status light 3-fold
Status light to monitor current process status
With the status light the cleaning system's status can be monitored from distance e. g. in larger production halls.
more about Status light 3-fold
Status light 5-fold
Extended status light to monitor current process status
With the status light the cleaning system's status can be monitored from distance e. g. in larger production halls.
more about Status light 5-fold
Traceability Basic (function package)
Data tracking, saving and storing
Traceable data transfer of process-relevant data for download to SD card via slot in the PLC of the cleaning system.
more about Traceability Basic (function package)
Traceability Comfort (function package)
Comprehensive data tracking, saving and storing
Traceability Comfort collects, documents, saves and archives automatically and/or manually, e.g. serial and batch numbers, quality data, machine data, events, quantities, process data.
more about Traceability Comfort (function package)
Upper/middle drawer basket
VA washing drawer unit with basket and rotor
VA stainless steel drawer unit with ASYNCHRO TopDown-double rotor with PUSHFORCE nozzles to increase the loading/cleaning capacity of horizontally cleaning systems.
more about Upper/middle drawer basket
WPCL IUT3
Water recycler: Factory made CrossLoop rinse water treatment module
Wastewater recycling SYMBIO-unit for processing and reuse of heavy metal containing water in the CrossLoop configuration. Suitable as a system integrated module for AQUBE® XH7 and AQUBE® XH9 systems.
more about WPCL IUT3
WPSD IU AF30
Wastewater disposer: Sewage water processing module for AF30 systems
SYMBIO-unit for the treatment of heavy metal contaminated rinsing water for indirect discharging into the public sewage network. For module integration in kolb AF30 AirFlow® cleaning systems with integrated ClosedLoop technology.
more about WPSD IU AF30
WPSD IU AF75
Wastewater disposer: Sewage water processing module for AF75 systems
For the treatment of contaminated rinsing water for discharging into a public sewage network. Modular disposal SYMBIO-unit with connected IBC container for kolb AF75 AirFlow® cleaning systems with integrated ClosedLoop technology.
more about WPSD IU AF75
WPSD IU AQUBE 5/6/7
Wastewater disposer: Sewage water processing module
SYMBIO-unit for the treatment of heavy metal contaminated rinsing water for indirect discharging into the public sewage network. For module integration in kolb AQUBE 5/6/7 cleaning systems with integrated ClosedLoop technology.
more about WPSD IU AQUBE 5/6/7
WPSD IU AQUBE 9
Wastewater disposer: Sewage water processing module
SYMBIO-unit for the treatment of heavy metal contaminated rinsing water for indirect discharging into the public sewage network. For module integration in kolb AQUBE 9 cleaning systems with integrated ClosedLoop technology.
more about WPSD IU AQUBE 9
XLPower Unit
High power pump unit for increased liquid volume and spray pressure
To shorten the cleaning time and increase cleaning efficiency of complicated built, fragmented products
more about XLPower Unit
XPower Unit
Extra power pump unit for increased liquid volume and spray pressure
To shorten the cleaning time and increase cleaning efficiency of complicated built, fragmented products
more about XPower Unit
XXLPower Unit
Ultra-high power pump unit for increased liquid volume and spray pressure
To shorten the cleaning time and increase cleaning efficiency of complicated built, fragmented products
more about XXLPower Unit
