MultiEx® N7-TS
Regenerative aqueous stencil cleaning and rinsing detergent
MultiEx® N7-TS is an aqueous, pH-neutral broadband cleaning and / or rinsing detergent for fine cleaning tasks.
MultiEx® N7-TS cleans particularly SMD-paste, dust, fats, oils and (conditionally) adhesives and fluxes.
MultiEx® N7-TS is most suitable for the quick and thorough cleaning with best material protection of stencils, misprints and for the stencil underside / flipside cleaning inside screen printers. Depending on cleaning task also suitable for assembled PCBs, solder carriers, solder pallets, ESD boxes, PCB magazines.
MultiEx® N7-TS is available as ReadyMix (green screw cap) and concentrate to blend with water (yellow screw cap) for use in kolb systems with PowerSpray® technology and common spray-in-air cleaning systems as well as inside screen printers. Depending on product and cleaning task also suitable for kolb AirFlow® systems as well common spray-in- immersion and ultrasonic cleaning systems.
MultiEx® N7-TS as a concentrate reaches its best efficiency at a blending ratio of 1:3 to 1:4.
Technical data | |
|---|---|
| Phases | Single Phase |
| pH Value at 20 °C | 6.7 (neutral) |
| Conductance at 20 °C | < 50 µS/cm |
| Application temperature | 20 °C - 45 °C |
| Regenerable (TS Technology) | |
| Flashpoint | > 100 °C |
| Rinse suitable | Error: returnAs is not defined! |
| VOC content | < 20% |
Downloads
MultiEx® N7-TS_RM
641 KB
MultiEx® N7-TS_CN
641 KB
MultiEx® N7-T_RM
MultiEx® N7-TS_CN
REACH, PFAS etc.
back
This detergent is not perfect for you?
