Cleaning of ESD boxes, storage containers, magazines and racks


ESD boxes, storage containers and magazines for the transport
and storage of PCBs / assembled PCBs, bare boards or wafers need to be cleaned regularly and thoroughly to avoid secondary contamination of sensitive components and areas.

Mainly dust, grease and oil but also paste, adhesive, colophony residues and even solder residues must be cleaned-off.

kolbprovides for the cleaning of  ESD boxes, PCB storage containers and magazines etc. the complete cleaning process as a manufacturer from a single source: including machinery, accessories, cleaners and specially applied electronic process control.

Suitable systems


AF30
Fully automatic one chamber XL system with AirFlow® technology

Cleaning in the entire chamber with AirFlow® air-in-immersion technology
Cleans: Condensation traps, solder-frames, carriers and machine parts
Usable process chamber dimensions: W 1.300 • D 450 • H 600 mm

more about AF30

AF75
XXL AirFlow® system for the bulk cleaning of condensation filters and coolers

Large maintenance cleaning device with crane loading
Cleans: Condensation traps of virtually all manufacturers as well as carriers, solder frames and pallets
Usable process chamber dimensions: W 1.030 • D 770 • H 600 mm

more about AF75

AQUBE® MH5
Tools cleaning system especially for solder carriers, pallets, trays

Capacity: 7 carriers up to 540 x 480 mm, 21“ x 19“ or up to two drawer baskets for small parts
Horizontal spray rotor system, VMH®-Turbo evaporative drying
PolyPower® Technology (up to three times more pressure power and up to 30% less cycle time)
Process chamber dimensions: W 540 • D 590 • H 570 mm

more about AQUBE® MH5

AQUBE® MH7
Fully automatic XL tools and maintenance cleaning system

Capacity: 11 carriers 710 x 580, 28" x 23" or 640 x 640 mm, 25" x 25" or up to three drawer baskets for small parts
Horizontal spray rotor system, VMH®-Turbo evaporative drying
PolyPower® technology (up to three times more pressure power and up to 30% less cycle time)
Process chamber dimensions: W 700 • D 720 • H 710 mm

more about AQUBE® MH7

AQUBE® MH9
Fully automatic XXL allround tools cleaning system with super large process chamber

Capacity: 28 carriers up to 750 x 950 mm, 29.5" x 37.5" or up to four drawer inserts for small parts
Horizontal spray rotor system, VMH®-Turbo evaporative drying
Process chamber dimensions: W 970 • D 955 • H 900 mm

more about AQUBE® MH9

Suitable detergents


ContraFlux® Basic

ContraFlux® Basic is an aqueous alkaline cleaning detergent for kolb AirFlow® or common spray-in-immersion cleaning systems.

Suitable for solder carriers, solder pallets, ESD boxes, PCB magazines, condensation traps

more about ContraFlux® Basic

ContraFlux® BC

ContraFlux® BC is an aqueous alkaline cleaning detergent for use in kolb systems with PowerSpray® and AirFlow® technology as well as common spray-in-air and spray-in-immersion cleaning systems.

Most suitable for solder carriers, solder pallets, ESD boxes, PCB magazines

more about ContraFlux® BC

MultiEx® A12

MultiEx® A12 is an aqueous alkaline cleaning detergent for use in kolb systems with PowerSpray® and AirFlow® technology as well as in any common spray-in-air and spray-in-immersion cleaning system.

Most suitable for PCBs, solder carriers, solder pallets, ESD boxes , PCB storage magazines

more about MultiEx® A12

MultiEx® VR series

MultiEx® VR series offers aqueous alkaline broadband detergents, ideal for ultra-fine cleaning of high-end electronic components, for use in kolb systems with PowerSpray® technology and all common spray-in-air cleaning systems.

Most suitable for: Assembled PCBs, ceramic substrates, misprints, stencils, solder carriers, solder pallets, ESD boxes, PCB magazines

more about MultiEx® VR series

PastEx® AP15

PastEx® AP is an aqueous alkaline broadband detergent, ideal for ultra-fine cleaning of high-end electronic components, for use in kolb systems with PowerSpray® technology and common spray-in-air cleaning systems and optionally as well in AirFlow® systems and common pray-in-immersion devices.

Most suitable for: Assembled PCBs, ceramic substrates, misprints, solder carriers, solder pallets, ESD boxes, PCB magazines

more about PastEx® AP15

Events

We are looking forward t see you at the Productronica Show, November 12 - 15. More information coming soon.

Read more
More events

News

Following an invitation by kolb's Indian distribution partner Bergen Associates kolb arranged a training session.

Read more

kolb's main distribution partner for the Far East celebrated on July 23 and 24 in Penang, Malaysia.

Read more

Dynatech takes over the sale and service for kolb products.

Read more
More news