AQUBE® X series
For the ultrafine cleaning of PCBs, DCBs, hybrids, SDIs, SIPs
The new kolb AQUBE® systems are next-generation cleaning systems - even more efficient, even more compact, easy to handle and maintain, pre-equipped for extended water management and ready for the smart factory (SF ready).
The systems of the kolb AQUBE® XH series offer ultra fine cleaning for highest demands such as the process safe cleaning of DCBs, PCBs, SiPs, HDI boards, hybrids and misprints from contaminations such as fluxes, rosin, resin, copper, Cu oxide and solder-support substances. AQUBE® XH systems clean up to 830 (19 m²) eurocards in up to four variable horizontal drawer baskets (relative cleaning time per board: approx. 6.5 seconds).
The three tank systems with three separate circuits and a fully automatic up to 5step process (1. Cleaning, 2. MediumWipe®, 3. Rinsing (tap water), 4. DI-rinsing with continuous DI-water processing, 5. Drying) are extremely compact and run with very low operating costs.
AQUBE® XH6
Fully automatic high-end ultra-fine cleaning system for assemblies/printed circuit boards
Capacity: up to 246 (3.9 m2 (41,9 ft2 )) eurocardsCleans PCBAs, hybrids and misprints from flux residues, resin, copper, oxide and soldering support substances
Process chamber dimensions: W 540 ▪ H 710 ▪ D 590 mm (W 24.26"▪ H 27.95" ▪ D 23.23")
more about AQUBE® XH6
AQUBE® XH7
(also available as AQUBE® XH7 TZD)
Fully automatic high end ultra-fine cleaning system for assemblies/printed circuit boards
Capacity: up to 522 (8.4 m² / 90,4 ft²) eurocards in up to three variable drawer basketsPolyPower® Technology (up to three times more pressure power and up to 30% less cycle time)
Horizontal up to sixfold spray rotors, VMH® TurboDigital evaporative drying
Process chamber dimensions: W 700 • D 720 • H 710 mm (W 27.55" • D 28.34" • H 27.95")
more about AQUBE® XH7
AQUBE® XH9
Fully automatic high-end ultra-fine cleaning system for mass cleaning of PCBAs
Capacity: up to 900 standard eurocards equals 14.4 m² (155 ft²) in up to four variable drawer baskets Horizontal up to eightfold spray rotors, VMH®-TurboDigital evaporative drying
Process chamber dimensions: W 970 • D 955 • H 900 mm (W 38.18" • D 37.59" • H 35.43")
more about AQUBE® XH9
AQUBE® XV7 SuperTask
Special system for cleaning assemblies/printed circuit boards with complex architectures
Capacity: 30 eurocards in two clamping frames of 15 cards each in a washing cartCleans PCBAs, hybrids and misprints from flux residues, resin, copper, oxide and soldering support substances
Process chamber dimensions: W 700 ▪ H 710 ▪ D 720 mm (W 27.55"▪ H 27.95" ▪ D 228.34")
more about AQUBE® XV7 SuperTask
AQUBE® XV9 SuperTask
Fully automatic high-end ultra-fine cleaning system for mass cleaning of PCBAs
Capacity: 96 eurocards in four clamping frames of 24 cardsVertical PTFE mounted rotor system with eight spray rotors for thorough wetting (no blind spots)
Process chamber dimensions: W 970 • D 955 • H 900 mm (W 38.18" • D 37.59" • H 35.43")
more about AQUBE® XV9 SuperTask
