Maintenance service of a cleaning system can be carried out by the operator himself and usually includes the cleaning of the machine (tanks, chambers, etc.), the cleaning of the spray nozzles and valves as well as the replacement of filters and cleaning fluid. The functionality of the system in a preset running process is thus ensured continuously.
A technical inspection, e.g. as kolb yearly service, is carried out by interdisciplinary specialists for machine, chemical and application engineering. Such an inspection covers the above mentioned work as well as the examination and, if necessary, the exchange of wearing parts as well as the checking and, if necessary, the optimization of all process parameters.
For each cleaning system, kolb offers ready-made maintenance / spare parts packages in a classification of 1 - 3, depending on the necessity or the total running time of the system.
As a full system manufacturer and supplier, kolb has extensive know-how in cleaning systems and chemistry as well as a 30-year experience in application technology and is thus able to offer a highly qualified and safe service in all areas.
Example (AQUBE® LH5): Exchange of process chamber ball valve and replacement wear discs of the rotors
Example (AQUBE® LH5): Replacement of water exchange ball valve
Example (PSE300 VL-R): Replacement of fine filters, process ball valves, air filter side channel compressor
Example (PSE 300 VL-R): Replacement of the process chamber door seal, change of the tank filter mats and wearing discs of the rotor