AQUBE® M series
Up to four screens / stencils or 14 carriers in one cleaning cycle
The new kolb AQUBE® systems are next-generation cleaning systems - even more efficient, even more compact, easy to handle and maintain, pre-equipped for extended water management and ready for the smart factory (SF ready).
The systems of the AQUBE® M series offer process safe cleaning of up to four screens, PumpPrints or stencils in one cycle from contaminations like SMD-adhesive, SMD-paste, flux, oil, dust or grease or multi option systems for almost every requirement of maintenance cleaning such as the cleaning of solder carriers / masks, ESD boxes, magazines, pallets, machinery parts and other small parts from flux, oil dust and grease.
The two tank combi systems withtriple circuit function and a fully automatic 3 or 4step process (cleaning, MediumWipe®, rinsing, drying) and ClosedLoop water processing are extremely compact delivering best cost of ownership value.
AQUBE® MH6
Fully automatic "all-round" tools and parts cleaning system
Capacity: 7 carriers up to 610 x 490 mm (24" x 19") or up to three washing drawersHorizontal PTFE-mounted rotor system with ASYNCHRON® spray rotors for thorough wetting (no blind spots)
Process chamber dimensions: W 540 ▪ D 590 ▪ H 710 mm (W 24.26" ▪ D 23.23" ▪ H 27.95")
more about AQUBE® MH6
AQUBE® MH7
(also available as AQUBE® MH7 TZD)
Fully automatic "all-round" tools and parts cleaning system
Capacity: 11 carriers up to 610 x 640 (24" x 25") or 640 x 640 mm (25" x 25") or up to three washing drawersHorizontal spray rotor system, VMH®-Turbo evaporative drying
PolyPower® technology (up to three times more pressure power and up to 30% less cycle time)
Process chamber dimensions: W 700 • D 720 • H 710 mm (W 27.55" • D 28.34" • H 27.95")
more about AQUBE® MH7
AQUBE® MH9
Superlarge fully automatic "all-round" tools and parts cleaning system
Capacity: 28 carriers up to 750 x 950 mm (29.5" x 37.5") using the washing cart use or up to four washing drawersHorizontal spray rotor system, VMH®-Turbo evaporative drying
Process chamber dimensions: W 970 • D 955 • H 900 mm (W 38.18" • D 37.59" • H 35.43")
more about AQUBE® MH9
AQUBE® MV3 ONE
Compact fully automatic high-end fine cleaning system for stencils/screens
Capacity: Screen, stencil, carrier, washing frame (PCBAs, Misprints, Squeegees) up to 770 x 950 mm (31" x 37")Fully automatic 4-step process, cleaning, MediumWipe®, rinsing and CWA® supercharger drying
Cleans stencils, screens, PumpPrint stencils, misprints from SMD adhesive, SMD paste, flux, oil, dust, grease
more about AQUBE® MV3 ONE
AQUBE® MV8 sTWIN
Twofold screen/stencil fine cleaning system with sequential utilization option
Capacity: 2 Stencils, screens, carriers up to 950 x 770 mm (37" x 30") in two separate process chambersFully automatic 4step process: cleaning, MediumWipe®, rinsing and CWA® supercharger drying
Cleans stencils, screens, PumpPrint stencils, misprints from SMD adhesive, SMD paste, flux, oil, dust, grease
more about AQUBE® MV8 sTWIN
AQUBE® MV9 QUAD
Fully automatic large-scale fine cleaning system for four screens/stencils
Capacity: 4 screens/stencils/carriers up to 800 x 940 (31.5“ x 37")Vertical eightfold spray rotors, CWA® supercharger compression drying
Relative cycle time: 7 minutes per stencil
Process chamber dimensions: W 970 • D 955 • H 900 mm (W 38.18" • D 37.59" • H 35.43")
more about AQUBE® MV9 QUAD
