AQUBE^® MV9 QUAD
专用于在一个循环内清洗四块印制钢板，印制网筛或压印网板

新版 kolb AQUBE^® 系统将成为下一个新生清洗系统-甚至更高效，更精简，简易操控及保养，提前装配有延长水的管控时间，专为就绪的数字工厂（SFr 证明书)。

AQUBE^® MV9 QUAD 为一款世界上仅有的批处理舱，针对安全精微清洗四块印制网筛，印制钢板或压印网板于一个清洁循环内。可以快速且彻底地清除污染源包括例如：SMD-膏，SMD-黏合剂，助焊剂残留成分，油污，灰尘或油（脂，膏）。专设于大规模生产线中，并排连接在几台印制网板印制机旁是最佳的位置。

本系统的大型处理舱可以支持四台印制机（四块印制钢板，印制网筛）每15分钟清洁与风干的量。

AQUBE^® MV9 QUAD 是由德国设计与制造为核心的包括闭式水处理再利用，两槽两分离环道结构确保了循环时间的缩短，使本系统成为最佳印制钢板清洁首选。

HT-版本的AQUBE^® MV9 QUAD也完全适用于kolb涂层清洗/脱漆交钥匙解决方案（机器、洗涤剂、工艺设计）。

Highlights

Two tank system with two separate circuits
Intelligent network connectivity for implementation in industry 4.0 smart factories
Fully automatic 4step process: cleaning, MediumWipe^®, rinsing, CWA^® supercharger compression drying
Vertical PTFE mounted rotor system with eight asynchronous spray rotors for thorough wetting (no blind spots)
Short cycle times (approx. 4 min relative cleaning time per stencil / normal contamination) due to placing the cleaning goods close to the spray rotors
Water free operation possible with a suitable cleaning / rinsing detergent
Processes and service intervals PLC controlled, event issuing and software control via touch screen
Safe installation close to the production line / screen printer possible; no special protection required
EDGELESS Design and VARIccess^® service access: maximum capacity, easy maintenance on a very small footprint

技术数据
Technology base	kolb PowerSpray^®
Control system (Display size)	PLC - Eaton (10“)
Standard capacity (per process cycle)	4 screens / stencils / carriers up to 800 x 940 x 40 mm (31.5“ x 37" x 1.5")
Process chamber dimensions	W 970 mm • D 955 mm • H 900 mm
Clamping space for PCBA, Misprints etc.	H 730 mm x W 525 mm
Max. stencil, carrier, washing frame size	H 800 mm x W 940 mm
Circuits	2 Cleaning, Rinsing
Volume Tank A	125 l • Cleaning
Volume Tank B	125 l • Rinsing tap water
Max. cleaning temperature	80 °C (176 °F)
Filtration	Up to four stages - 1. Full flow coarse filter < 2 mm, 2. Sediment filter inside the tank, 3. 20“ fine filter (1 - 100µm - process dependent), 4. HMA filter
Drying System	CWA^® 增压器
Drying temperature range	Compressed warm air
Power supply	400 V AC, 32 A, CEE plug / 3 Ph / 50 or 60 Hz
Power consumption	7 kW
Supply connection 1 (tap water)	1“
Supply connection 3 (Compressed Air)	8 mm (87 - 116 psi - 100 l / min)
Empty Weight	920 kg (2,029 lbs)
Footprint	1700 mm x 1850 mm (66.93″ x 72.83″)