AQUBE® XH9
Cleans PCBAs, hybrids and misprints from flux residues, resin, copper, oxide and soldering support substances
AQUBE® XH9 is a fully automatic high-end ultra-fine cleaning system for PCBAs, hybrids and DCBs as well as single-sided misprints with a capacity of up to 903 (14.4 m²/155 ft 2 ) eurocards and a relative cleaning time of approx. five seconds per card per cleaning cycle.
The configuration with a super large process chamber, three tanks working in parallel and three separate circuits, cleaning temperatures of up to 80 °C and drying temperatures of up to 120 °C as well as closed-loop water treatment ensures short cycle times and low operating costs, resulting in unprecedentedly low total cost of ownership.
This makes the AQUBE® XH9 the perfect economic choice for qualified mass cleaning of assembled PCBs/circuit boards. The compact, easy-to-operate and easy-to-maintain system is Smart-Factory-ready and pre-equipped for extended water management.
Schedule a Consultation
Highlights
- Three-tank system with three separate circuits
- Average process time: 70 min/cycle = approx. 5 s per eurocard
- Smart-Factory-ready: remote control, traceability (PLC data scanning and memorizing)
- Fully automatic 4-step (optional up to 5-step) process: cleaning, (MediumWipe), rinsing (tap water), DI-/DM-water rinsing, VMH TurboDigital hot air evaporative drying
- Horizontal PTFE mounted rotor system with up to eight ASYNCHRO® spray rotors for thorough wetting (no blind spots)
- Heater cleaning tank A, automatic water change for the rinsing circuit, DI water system, DI-bypass processing, water measuring unit (ion contamination measurement), ion exchanger and fine filter systems as standard
- Processes and service intervals PLC controlled with event issuing and software control via touch screen
- Suitable for high temperature cleaning and rinsing up to 80 °C (176 °F)
- Highest capacity on a comparably small footprint, fast and easy maintenance
kolb Technologies & Benefits
Technical Data (Excerpt) | |
|---|---|
| Technology base | kolb PowerSpray |
Standard capacity (per process cycle)
| 903 (14.4 m²) eurocards |
| Process chamber dimensions | W 900 mm • D 955 mm • H 970 mm |
| Max. number washing baskets | 4 |
| Washing basket size | 890 mm x 890 mm |
| Circuits | 3: Cleaning, Rinsing tap water, Rinsing DI-water |
| Volume Tank A (Cleaning) | 125 L |
| Volume Tank B (Rinsing) | 100 L |
| Volume Tank C (DI-/VE-Rinsing) | 125 L |
| Max. cleaning temperature | 80 °C (176 °F) |
| Filtration | 1. Full flow coarse filter < 2mm (0.08"), 2. 20“ fine filter (1 - 100 µm - process dependent) |
| Drying System | VMH-TurboDigital hot air |
| Drying temperature range | approx. 45 - 120 °C (113 and 248 °F) |
| Footprint | 1700 mm x 1850 mm (66.93″ x 72.83″) |
Downloads
Product InformationAQUBE® XH9
Compliance CertificatesREACH, PFAS etc.back
Not the ideal system for you?
