AQUBE® XH7
(also available as AQUBE® XH7 TZD)
Cleans PCBAs, hybrids and misprints from flux residues, resin, copper, oxide and soldering support substances
AQUBE® XH7 is a fully automatic high-end ultra-fine cleaning system for assemblies/printed circuit boards/PCBs, hybrids and DCBs as well as single-sided misprints with a capacity of up to 522 (8.4 m²/90.4 ft 2 ) eurocards and a relative cleaning time of approx. seven seconds per card per cleaning cycle.
The configuration with large process chamber, three parallel working tanks and three separate circuits, up to 80 °C cleaning temperature and up to 120 °C drying temperature as well as ClosedLoop water treatment ensures short cycle times and low operating costs, which make the AQUBE® XH7 the economically perfect choice for the qualified cleaning of PCBAs and DCBs.
The compact, easy-to-operate and easy-to-maintain system is Smart Factory ready, pre-equipped for extended water management and available with ToZero-Discharge Technology.
Schedule a Consultation
Highlights
- Three-tank system with three separate circuits
- Average process time: 60 min/cycle = approx. 7 s per eurocard
- Smart-Factory-ready: remote control, traceability (PLC data scanning and memorizing)
- Fully automatic 4-step (optional up to 5-step) process: cleaning, (MediumWipe ), rinsing (tap water), DI-/DM-water rinsing,
- VMH TurboDigital hot air evaporative drying
- Horizontal PTFE-mounted rotor system with up to six ASYNCHRO® spray rotors for thorough wetting (no blind spots)
- Heater cleaning tank A, automatic water change for the rinsing circuit, DI water system, DI-bypass processing, water measuring unit (ion contamination measurement), ion exchanger and fine filter systems as standard
- Processes and service intervals PLC controlled with event issuing and software control via touch screen
- Suitable for high temperature cleaning and rinsing up to 80 °C (176 °F)
- High capacity on a small footprint, fast and easy maintenance
kolb Technologies & Benefits
ToZero-Discharge Technology
Multi-stage rinsing process technology developed by kolb for batch systems to save up to 90 % of rinsing water.
Technical Data
Technical Data (Excerpt) AQUBE® XH7 | |
|---|---|
| Technology base | kolb PowerSpray |
Standard capacity (per process cycle)
| 522 (8.4 m² / 90,4 ft²) eurocards |
| Process chamber dimensions | W 710 mm • D 720 mm • H 700 mm |
| Max. number washing baskets | 3 |
| Washing basket size | 620 mm x 620 mm |
| Circuits | 3: Cleaning, Rinsing tap water, Rinsing DI-water |
| Volume Tank A (Cleaning) | 95 L |
| Volume Tank B (Rinsing) | 65 L |
| Volume Tank C (DI-/VE-Rinsing) | 105 L |
| Max. cleaning temperature | 80 °C (176 °F) |
| Filtration | 1. Full flow coarse filter < 2mm (0.08"), 2. 20“ fine filter (1 - 100 µm - process dependent) |
| Drying System | VMH-TurboDigital hot air |
| Drying temperature range | approx. 45 - 120 °C (113 and 248 °F) |
| Footprint | 1400 mm x 1550 mm (55.12″ x 61.02″) |
Technical Data (Excerpt) AQUBE® XH7 TZD | |
|---|---|
| Technology base | kolb PowerSpray |
Standard capacity (per process cycle)
| 522 (8.4 m² / 90,4 ft²) eurocards |
| Process chamber dimensions | W 710 mm • D 720 mm • H 700 mm |
| Max. number washing baskets | 3 |
| Washing basket size | 620 mm x 620 mm |
| Circuits | 7: Reinigen, (3x) TZD-Rinsing tap water, Rinsing DI-water |
| Volume Tank A (Cleaning) | 95 L |
| Volume Tank B (Rinsing) |
Tank B 1: 65 L Tank B 2: 65 L Tank B 3: 65 L |
| Volume Tank C (DI-/VE-Rinsing) | 105 L |
| Max. cleaning temperature | 80 °C (176 °F) |
| Filtration | 1. Full flow coarse filter < 2mm (0.08"), 2. 20“ fine filter (1 - 100 µm - process dependent) |
| Drying System | VMH-TurboDigital hot air |
| Drying temperature range | approx. 45 - 120 °C (113 and 248 °F) |
| Footprint | 1850 mm x 1550 mm (55.12″ x 61.02″) |
Downloads
Product InformationAQUBE XH7Product InformationAQUBE XH7 TZD
Compliance CertificatesREACH, PFAS etc.back
Not the ideal system for you?
