PSE 300 VS

PSE 300 VS
Cleans screens, stencils, solder carriers and misprints

The PSE 300VS is an extremly compact first-rate performance PowerSpray^® system for smaller quantities with very short cycle times due to an intelligent 2-step process with patented high performance CWA^® supercharger compression drying. It can be operated without water/waste water connection.
It delivers best possible cleaning of screens, stencils, misprints and solder frames.

The cleaning system can be operated with all common electronics cleaning supplies (detergents/chemistry, etc.) which are approved by kolb.

Highlights

Mono-tank compact system with two tank function
Waterless/Independetn, no water/waste water connection necessary
Comfortable push one button operation
Fully automatic 2-step process: cleaning/rinsing, drying with CWA^® supercharger compression drying.
Vertical rotor system with two asynchronous spray rotors for thorough wetting (no blind spots)
Process and service intervals PLC controlled, event issuing and software control via 3.5" touch screen
Process sections made of electrolysis and high temperature resistant elements
Safe installation close to production line possible; no special protection required
Certified for solar cell production
Extremly compact – maximum capacity on a very small footprint

技术数据
Technology base	kolb PowerSpray^®
Control system (Display size)	PLC - Eaton (3“)
Standard capacity (per process cycle)	Screen, stencil, carrier, washing frame up to 950 x 780mm (37.5" x 31")
Process chamber dimensions	W 350 mm • D 980 mm • H 920 mm
Max. stencil, carrier, washing frame size	H 950 mm x W 780 mm
Circuits	1+ Cleaning / Rinsing (communicating)
Volume Tank A	100 l • Cleaning / Rinsing (communicating)
Max. cleaning temperature	Room temperature
Filtration	1. Full flow coarse filter < 2mm (0.8"), 2. Sediment filter inside the tank, 3. 20" fine filter (1 - 100 µm – process dependent)
Drying System	CWA^® 增压器
Drying temperature range	Compressed warm air
Power supply	400 V AC, 16 A, CEE plug / 3 Ph / 50 or 60 Hz
Power consumption	3 kW
Empty Weight	330 kg (728 lbs)
Footprint	800 mm x 1200 mm (31.50″ x 47.24″)