AQUBE MV8 sTWIN

AQUBE^® MV8 sTWIN
双舱不间断式分离清洗两块印制网板

新版 kolb AQUBE^® 系统将成为下一个新生清洗系统-甚至更高效，更精简，简易操控及保养，提前装配有延长水的管控时间，专为就绪的数字工（SF ready 证明书)。

AQUBE^® MV8 sTWIN 运用高科技双模式舱体PowerSpray^®系统可不同时间彻底地进行清洗两块网板，供方延其卓越成就结果再进行时间性缩短。

AQUBE^® MV8 sTWIN 的目标清洗对象最大指标为950 x 770 mm (37 "x 30"), 专供特殊性质适合者为大型制造作业。旧模式清洗需等待另一张网板结束方可清洗，更新后模式为不间断式清洗作业，意为两张网板可作业于不同的时间清洗，两舱分离，无需要等待。

Highlights

Two full-fledged process chambers for parallel or sequential cleaning
Two tank system with four separate circuits
Digital Factory ready: DNAccess, remote control, traceability (PLC data scanning and memorizing)
Fully automatic 4step process: cleaning, MediumWipe^®, rinsing (tap water), drying with warm air
Vertical fourfold rotor system with asynchronous spray rotors for thorough wetting (no blind spots)
XPower magnetic coupled pumping system
Short cycle time (approx. 7 min.) depending on used detergent and contamination
ClosedLoop reprocessing of cleaning and rinsing fluids as standard feature
Water-free operation possible: Instead of water the system can use a suitable cleaning / rinsing detergent for rinsing
Process and service intervals PLC controlled
Event issuing and software control via high resolution 7" display with capacitive multi-touch
PLC data recording and importing by scanner possible
EDGELESS Design and VARIccess^® maintenance access: maximum capacity on a very small footprint

技术数据
Technology base	kolb PowerSpray^®
Control system (Display size)	PLC - Eaton (10“)
Standard capacity (per process cycle)	2 Stencils, screens, carriers up to 950 x 770 mm (37" x 30")
Process chamber dimensions	W 440 mm • D 1000 mm • H 875 mm
Clamping space for PCBA, Misprints etc.	H 525 mm x W 730 mm
Max. stencil, carrier, washing frame size	H 770 mm x W 950 mm
Circuits	2+ Cleaning, Rinsing tap water / Rinsing DI-water (combined)
Volume Tank A	75 l • Cleaning
Volume Tank B/C	75 l • Rinsing tap water / Rinsing DI-water (combined)
Max. cleaning temperature	50 °C (122 °F)
Filtration	Up to three stages - 1. Full flow coarse filter < 2 mm, 2. Cascaded sediment filter inside the tank, 3. 20“ fine filter (1 - 100 µm - process dependent)
Drying System	CWA^® 增压器
Drying temperature range	Compressed warm air
Power supply	400 V AC, 16 A, CEE plug / 3 Ph / 50 or 60 Hz
Power consumption	7 kW
Supply connection 1 (tap water)	1/2“
Supply connection 3 (Compressed Air)	8 mm (87 - 116 psi - 100 l / min)
Empty Weight	630 kg (1,389 lbs)
Footprint	1050 mm x 1700 mm (41.34″ x 66.93″)