AQUBE^® MV3 ONE

AQUBE^® MV3 ONE
电气制造商的完美清洁多功能工具

新版 kolb AQUBE^{^®} 系统将成为下一个新生清洗系统-甚至更高效，更精简，简易操控及保养，提前装配有延长水的管控时间，专为就绪的数字工（SF ready 证明书)。

kolb AQUBE^® MV3 ONE 是一种全自动系统，用于对丝网、钢网、PumpPrints、Squeegees 以及（可选）PCB 和焊料框架和载体进行可靠的精密清洗。它能快速彻底地清除各种污染物，如 SMD 焊膏、SMD 粘合剂、助焊剂残留物、稳定剂材料、助焊剂、油、油脂或灰尘。

O如今，对装配好的印刷电路板（超精细清洁）、丝网和钢网（精细清洁）以及作为焊料载体和焊料托盘的生产工具（维护清洁）进行最佳清洁，是实现可再现质量和低故障率的先决条件，从而提高客户满意度。两个水箱和两个独立回路的配置以及闭环水处理确保了较短的吞吐时间，使该系统成为彻底清洗钢网、丝网或少量 PCBA 的经济型完美选择。

然而，在中小型企业中，单个清洗任务的工作量并不是很大，不足以证明钢网清洗系统的投资回报率。

德国设计和制造的 kolb AQUBE^® MV3 ONE 是一种考虑到这一点的高端系统。通过 "PCB 清洁 "功能包，它可以作为一个完整的混合系统与闭环水再处理系统一起工作，不仅可以清洁屏幕、钢网和错印，还可以承担超精细 PCB 清洁和维护清洁任务。

Highlights

Two-tank system with two separate circuits
Intelligent connectivity for implementation in Industry 4.0 environments
Fully automated 4Step process: cleaning, MediumWipe^®, rinsing, CWA^® high-performance compressor drying
Vertical rotor system with ASYNCHRO^® spray rotors for for thorough wetting (no blind spots)
Integrated condensate recovery in the process chamber
Short cycle times due to close placement of the cleaning material between the rotors
Water-free use possible: The system can also use a cleaning / rinsing medium (instead of water) for rinsing purposes
Process and maintenance intervals PLC controlled, event issuing and software control via 10" touch screen
EDGELESS design and VARIccess^® maintenance access: Highest capacity, easiest maintenance on smallest footprint
Suitable for high temperature cleaning up to 80 °C

技术数据
Technology base	kolb PowerSpray^®
Control system (Display size)	PLC - Eaton (10“)
Standard capacity (per process cycle)	One screen, stencil up to 770 x 950 mm (31" x 37")or 21 eurocards in a (PCBA-) carrier/ washing frame
Process chamber dimensions	W 350 mm • D 980 mm • H 920 mm
Clamping space for PCBA, Misprints etc.	H 730 mm x W 525 mm
Max. stencil, carrier, washing frame size	H 770 mm x W 950 mm
Circuits	2+ Cleaning, Rinsing tap water / Rinsing DI-water (combined)
Volume Tank A	75 l • Cleaning
Volume Tank B/C	75 l • Rinsing tap water / Rinsing DI-water (combined)
Max. cleaning temperature	80 °C (176 °F)
Filtration	Up to three stages - 1. Full flow coarse filter < 2 mm, 2. Cascaded sediment filter inside the tank, 3. 20“ fine filter (1 - 100 µm - process dependent)
Drying System	CWA^® 增压器
Drying temperature range	Compressed warm air
Power supply	400 V AC, 16 A, CEE plug / 3 Ph / 50 or 60 Hz
Power consumption	4 kW
Supply connection 1 (tap water)	1/2“
Supply connection 3 (Compressed Air)	8 mm (87 - 116 psi - 100 l / min)
Empty Weight	570 kg (1,257 lbs)
Footprint	950 mm x 1600 mm (37.40″ x 62.99″)