PSE 300 VS
Cleans screens, stencils, carriers and misprints
kolb PSE 300 VS is an extremely compact first-rate performance PowerSpray system designed and manufactured in Germany for smaller quantities, allowing very short cycle times due to an intelligent 2-step process with patented high performance supercharger drying.
PSE 300 VS delivers best possible cleaning of screens, stencils, misprints and solder frames – today a prerequisite for reproducible quality in production, the reduction of expensive production stand-stills and as well for high customer satisfaction.
Schedule a Consultation
Highlights
- Compact mono-tank system with two tank function and communicating detergent
- Average process time: 18 min per stencil
- Waterless/independent, no water/waste water connection necessary
- Fully automatic 2-step process: cleaning/rinsing, drying with CWA supercharger compression drying
- Vertical rotor system with two ASYNCHRO spray rotors for thorough wetting (no blind spots)
- Process and service intervals PLC controlled, event issuing and software control via 3,5" touch screen
- Process sections made of electrolysis and high temperature resistant elements
- Safe installation close to the production line possible; no special protection required
- Certified for solar cell production
- Extremely compact – high performance on a very small footprint
kolb Technologies & Benefits
Technical Data (Excerpt) | |
|---|---|
| Technology base | kolb PowerSpray |
| Standard capacity (per process cycle) | Screen, stencil, carrier, washing frame up to 950 x 780mm (37.5" x 31") |
| Process chamber dimensions | W 350 mm • D 1000 mm • H 920 mm |
| Max. stencil, carrier, washing frame size | H 950 mm x W 780 mm |
| Circuits | 1: Cleaning / Rinsing (communicating) |
| Volume Tank A (Cleaning, communicating) | 100 L |
| Max. cleaning temperature | Room temperature |
| Filtration | 1. Full flow coarse filter < 2 mm (0.08"), 2. 20“ fine filter (1 - 100 µm - process dependent) |
| Drying System | CWA supercharger |
| Drying temperature range | Compressed warm air |
| Footprint | 800 mm x 1200 mm (31.50″ x 47.24″) |
Downloads
Product Information
Compliance CertificatesREACH, PFAS etc.back
With the appropriate options, the system can also be optimized for conditionally recommended applications.
Not the ideal system for you?
