AQUBE® MV8 sTWIN
Cleans screens, stencils and PumpPrints from SMD paste, SMD adhesive, soldering support substances, oil & dust
The AQUBE® MV8 sTWIN is a fully automatic system with two process chambers for reliable precision cleaning of screens, stencils, PumpPrints or other flat products.
It removes quickly and thoroughly contaminations such as SMD-paste, SMD-adhesive, flux residues, stabilizer materials, flux, oil, grease or dust.
The unique configuration of AQUBE® MV8 sTWIN with two tanks, four independent circuits and ClosedLoop water treatment does not require waiting for two stencils to be cleaned, or until running cleaning process is completed – one stencil cleaning can be started immediately and another time-delayed (or parallel).
The compact, easy-to-operate and easy-to-maintain system is Smart-Factory-ready
Schedule a Consultation
Highlights
- Two full-fledged separate process chambers, sequentially usable
- Two-tank system with four separate circuits
- Average process time: 16 min/cycle = approx. 8 min per stencil
- Intelligent network connectivity for implementation in industry 4.0 smart factories
- Fully automatic 4-step process: cleaning, MediumWipe, rinsing, CWA supercharger compression drying
- Vertical rotor system with four ASYNCHRO spray rotors for thorough wetting (no blind spots)
- Water free operation possible with a suitable cleaning/rinsing detergent
- Processes and service intervals PLC controlled with event issuing and software control via touch screen
- Safe installation close to the production line/screen printer possible; no special protection required
- High performance on a very small footprint, large access points for quick and easy maintenance
kolb Technologies & Benefits
Technical Data (Excerpt) | |
|---|---|
| Technology base | kolb PowerSpray |
| Standard capacity (per process cycle) | 2 Stencils, screens, carriers up to 950 x 770 mm (37" x 30") |
| Process chamber dimensions | W 540 mm • D 1000 mm • H 875 mm |
| Clamping space for PCBA, Misprints, etc. | H 525 mm x W 730 mm |
| Max. stencil, carrier, washing frame size | H 770 mm x W 950 mm |
| Circuits | 2: Cleaning, Rinsing tap water / Rinsing DI-water (combined) |
| Volume Tank A (Cleaning) | 75 L |
| Volume Tank B/C (Rinsing) | 75 L |
| Max. cleaning temperature | 50 °C (122 °F) |
| Filtration | 1. Full flow coarse filter < 2mm (0.08"), 2. 20“ fine filter (1 - 100µm - process dependent) |
| Drying System | CWA supercharger |
| Drying temperature range | Compressed warm air |
| Footprint | 1050 mm x 1700 mm (41.34″ x 66.93″) |
Downloads
Product InformationAQUBE® MV8 sTWIN
Compliance CertificatesREACH, PFAS etc.back
Not the ideal system for you?
