AQUBE® MV3 ONE
Cleans screens, stencils and PumpPrints and PCBAs SMD paste, SMD adhesive, soldering support substances, oil & dust
The AQUBE®MV3 ONE is a fully automatic system for reliable precision cleaning of screens, stencils, PumpPrints, Squeegees and solder frames and carriers.
It removes quickly and thoroughly contaminations such as SMD-paste, SMD-adhesive, flux residues, stabilizer materials, flux, oil, grease or dust. Also suitable for PCBA cleaning with the corresponding function package.
AQUBE®MV3 ONE is a German engineered and manufactured machine with ClosedLoop water reprocessing and a two-tank and two separate circuits configuration which ensures short cycle times and makes this system the perfect economic choice for the cleaning of screens and stencils and smaller amounts of PCBAs.
The compact, easy-to-operate and easy-to-maintain system is Smart-Factory-ready.
Schedule a Consultation
Highlights
- Two-tank system with two separate circuits
- Average process time: 16 min per stencil
- Intelligent network connectivity for implementation in industry 4.0 smart factories
- Fully automatic 4-step process: cleaning, MediumWipe, rinsing, drying with CWA supercharger compression drying
- Vertical rotor system with ASYNCHRO® spray rotors for thorough wetting (no blind spots)
- Integrated condensate recovery in the process chamber
- Water-free operation possible: the system can operate with suitable cleaning/rinsing detergents for rinsing
- Processes and service intervals PLC controlled with event issuing and software control via 10" touch screen
- Safe installation close to the production line/screen printer possible; no special protection required
- Suitable for high temperature cleaning and rinsing up to 80 °C (176 °F)
kolb Technologies & Benefits
Technical Data (Excerpt) | |
|---|---|
| Technology base | kolb PowerSpray |
Standard capacity (per process cycle)
| One screen, stencil up to 770 x 950 mm (31" x 37") or 21 eurocards in a (PCBA-) carrier/ washing frame |
| Process chamber dimensions | W 350 mm • D 980 mm • H 920 mm |
| Clamping space for PCBA, Misprints, etc. | H 730 mm x W 525 mm |
| Max. stencil, carrier, washing frame size | H 770 mm x W 950 mm |
| Circuits | 2: Cleaning, Rinsing tap water / Rinsing DI-water (combined) |
| Volume Tank A (Cleaning) | 75 L |
| Volume Tank B/C (Rinsing) | 75 L |
| Max. cleaning temperature | 80 °C (176 °F) |
| Filtration | 1. Full flow coarse filter < 2 mm (0.08"), 2. 20“ fine filter (1 - 100µm - process dependent) |
| Drying System | CWA supercharger |
| Drying temperature range | Compressed warm air |
| Footprint | 950 mm x 1600 mm (37.40″ x 62.99″) |
Downloads
Product Information
Compliance CertificatesREACH, PFAS etc.back
Not the ideal system for you?
