AQUBE® LH7
Cleans PCBAs, hybrids and misprints from flux residues, resin, copper, oxide and soldering support substances
AQUBE® LH7 is a standard high volume ultra-fine cleaning system for assemblies/printed circuit boards/PCBAs, hybrids, SiPs etc. and single-side mounted misprints. AQUBE® LH7 is a completely German engineered and manufactured fully automatic system with an XL process chamber with a capacity of up to 522 (8.4 m²) eurocards and a relative cleaning time of 10 seconds per card.
The configuration with two tanks and triple circulation function and up to 80 °C cleaning temperature and up to 120 °C drying temperature ensures short cycle times and makes the AQUBE® LH7 the perfect choice for the qualified cleaning of assembled PCBAs/circuit boards.
The easy-to-operate and easy-to-maintain system is Smart-Factory-ready and pre-equipped for extended water management
Schedule a Consultation
Highlights
- Two-tank system with triple circuit function
- Average process time: 65 min/cycle = approx. 7 s per eurocard
- Smart-Factory-ready: remote control, traceability (PLC data scanning and memorizing)
- Fully automatic 4-step process: cleaning, rinsing (tap water), DI-water rinsing, VMH TurboDigital hot air evaporative drying
- Horizontal PTFE-mounted rotor system with up to four ASYNCHRO spray rotors for thorough wetting (no blind spots)
- Heater cleaning tank A, automatic water change for the rinsing circuit, DI-water system, mixing-blending unit, water measuring unit (ion contamination measurement), ion exchanger and fine filter system as standard
- Processes and service intervals PLC controlled withe event issuing and software control via touch screen
- Suitable for high temperature cleaning and rinsing up to 80 °C (176 °F)
- High capacity on a small footprint, fast and easy maintenance
kolb Technologies & Benefits
Technical Data (Excerpt) | |
|---|---|
| Technology base | kolb PowerSpray |
Standard capacity (per process cycle)
| 522 (8.4 m² / 90,4 ft²) eurocards |
| Process chamber dimensions | W 710 mm • D 720 mm • H 700 mm |
| Max. number washing baskets | 3 |
| Washing basket size | 620 mm x 620 mm |
| Circuits | 2: Cleaning, Rinsing tap water / Rinsing DI-water (combined) |
| Volume Tank A (Cleaning) | 95 L |
| Volume Tank B/C (Rinsing) | 65 L |
| Max. cleaning temperature | 80 °C (176 °F) |
| Filtration | 1. Full flow coarse filter < 2 mm (0,08"), 2. 20“ fine filter (1 - 100µm - process dependent), 4. HMA filter |
| Drying System | VMH-TurboDigital hot air |
| Drying temperature range | approx. 45 - 120 °C (113 and 248 °F) |
| Footprint | 1400 mm x 1550 mm (55.12″ x 61.02″) |
Downloads
Product InformationAQUBE® LH7
Compliance CertificatesREACH, PFAS etc.back
Not the ideal system for you?
