AQUBE® LH5
Cleans PCBAs, hybrids and misprints from flux residues, resin, copper, oxide and soldering support substances
The AQUBE®LH5 is a fully automatic standard ultra-fine cleaning system for assemblies/printed circuit boards/PCBAs, hybrids, SiPs etc. and single-side mounted misprints with a capacity of up to 176 (2.8 m² /30 ft2) eurocards per cleaning cycle.
The configuration with two tanks and triple circulation function and up to 80 °C cleaning temperature and up to 120 °C drying temperature ensures short cycle times and makes the AQUBE®LH5 the perfect choice for the qualified cleaning of assembled PCBAs/circuit boards.
The compact, easy-to-operate and easy-to-maintain system is Smart Factory ready and pre-equipped for extended water management.
Schedule a Consultation
Highlights
- Two-tank system with triple circuit function
- Average process time: 65 min/cycle = approx. 22 s per eurocard
- Smart Factory ready: remote control, traceability (PLC data scanning and memorizing)
- Fully automatic 4-step process: cleaning, rinsing (tap water), DI-water rinsing, VMH TurboDigital hot air evaporative drying
- Horizontal PTFE-mounted rotor system with up to four ASYNCHRO® spray rotors for thorough wetting (no blind spots)
- Heater cleaning tank A, automatic water change for the rinsing circuit, DI-water system, mixing-blending unit, water measuring unit (ion contamination measurement), ion exchanger and fine filter system as standard
- Processes and service intervals PLC controlled, event issuing and software control via touch screen
- Suitable for high temperature cleaning and rinsing up to 80 °C (176 °F)
- Also suitable for cleaning up to seven solder carriers up to 540 x 480 mm/21" x 19" (in a washing cart)
kolb Technologies & Benefits
Technical Data (Excerpt) | |
|---|---|
| Technology base | kolb PowerSpray |
Standard capacity (per process cycle)
| 176 (2.8 m² / 30 ft²) eurocards |
| Process chamber dimensions | W 570 mm • D 590 mm • H 540 mm |
| Max. number washing baskets | 2 |
| Washing basket size | 470 mm x 470 mm |
| Circuits | 2: Cleaning, Rinsing tap water / Rinsing DI-water (combined) |
| Volume Tank A (Cleaning) | 55 L |
| Volume Tank B/C (Rinsing) | 35 L |
| Max. cleaning temperature | 80 °C (176 °F) |
| Filtration | 1. Full flow coarse filter < 2mm (0.08"), 2. 20“ fine filter (1 - 100 µm - process dependent) |
| Drying System | VMH-TurboDigital hot air |
| Drying temperature range | approx. 45 - 120 °C (113 and 248 °F) |
| Footprint | 840 mm x 1180 mm (33.07″ x 46.46″) |
Downloads
Product InformationAQUBE® LH5
Compliance CertificatesREACH, PFAS etc.back
With the appropriate options, the system can also be optimized for conditionally recommended applications.
Not the ideal system for you?
