AF75
For the mass cleaning of condensation filters of virtually all manufacturers, carriers from flux, condensate, oil, dust, grease
kolb AF75 is a state of the art one chamber system with the economic and environmentally friendly AirFlow air-in-immersion technology and ClosedLoop water reprocessing. The device is especially designed for the bulk cleaning of condensation traps and filters. It cleans traps of virtually all manufacturers from condensate from flux, oil, dust, grease.
Up-to-date reflow-soldering systems as well as solar process ovens usually have flux management systems (cooling unit, filters, heat exchanges, containers/plates) which during operation will be subject to contamination (with flux/raisin). Thorough cleaning helps to regain proper functioning. The system is (in series use) perfectly suited for the construction of complete washing centers that comply with the latest technical state of the art and can deliver extremely high throughput quantities.
Schedule a Consultation
Highlights
- Single-chamber system with automatic operation: cleaning, rinsing, drying
- Average process time: 60 min
- Loading and unloading in an empty process chamber (no contact to detergent)
- Control unit in switch cabinet on the rear side
- Processes and service intervals PLC controlled
- External 1,000 l IBC releasing containers for cleaning and rinsing fluid
- Re-dosage directly from the IBC container
- External cleaning of cyclones and oven tubings possible
kolb Technologies & Benefits
Technical Data (Excerpt) | |
|---|---|
| Technology base | kolb AirFlow |
Standard capacity (per process cycle)
| Condensation traps, filters, carriers, solder frames and pallets up to W 705 x D 1,165 x H 510 mm (basket size) |
| Process chamber dimensions | W 1280 mm • D 770 mm • H 600 mm |
| Max. stencil, carrier, washing frame size | H 510 mm x W 705 mm |
| Circuits | 2: Cleaning, Rinsing |
| Volume Tank A (Cleaning) | 1000 L |
| Volume Tank B (Rinsing) | 1000 L |
| Max. cleaning temperature | 65 °C (149 °F) |
| Filtration | up to three stages - 1. Full flow coarse filter < 2 mm (0.08"), 2. Skimmer coarse filter, 3. Fine filter 20“ / 100 - 50 - 10 µm in the circuits |
| Drying System | CTS HotSpeed warm air |
| Drying temperature range | approx. 55 - 60 °C (131 and 140 °F) |
| Footprint | 2360 mm x 940 mm (92.91″ x 37.01″) |
Downloads
Product InformationAF75
Compliance CertificatesREACH, PFAS etc.back
Not the ideal system for you?
