AF20
Cleans carriers, pallets, condensation filters of virtually all manufacturers from flux, condensate, oil, dust, grease
kolb AF20 is a state of the art immersion cleaning system with ClosedLoop water reprocessing.
It cleans components of flux management systems (cooling units, filters, heat exchangers, containers/plates)* of virtually all manufacturers as well as lathe parts, milled parts, die cast components or other bulk good (with washing drum option) from flux, condensate, oil, dust, grease using the economic and environmentally friendly AirFlow technology.
*Up-to-date reflow-soldering systems as well as solar process ovens usually have flux management systems (cooling unit, filters, heat exchanges, containers/plates) which during operation will be subject to contamination (with flux/raisin). Thorough cleaning helps to regain proper functioning.
Schedule a Consultation
Highlights
- Single-chamber system with automatic operation: cleaning, rinsing, drying
- Average process time: 60 min
- Loading and unloading in an empty process chamber (no contact to detergent)
- Processes and service intervals PLC controlled
- Event issuing and software control via touch screen
- External cleaning of cyclones and oven tubings possible
- Plug & work system (connect, fill, start)
- Installation close to the production line possible; no special protection required
kolb Technologies & Benefits
Technical Data (Excerpt) | |
|---|---|
| Technology base | kolb AirFlow |
Standard capacity (per process cycle)
| Filters, condensation traps, carriers up to a size of 800 x 430 x 500 mm |
| Process chamber dimensions | W 800 mm • D 430 mm • H 500 mm |
| Max. stencil, carrier, washing frame size | H 800 mm x W 500 mm |
| Circuits | 2: Cleaning, Rinsing |
| Volume Tank A (Cleaning) | 230 L |
| Volume Tank B (Rinsing) | 230 L |
| Max. cleaning temperature | 50 °C (122 °F) |
| Filtration | up to three stages - 1. Full flow coarse filter < 2 mm (0.08"), 2. Skimmer coarse filter, 3. Fine filter 20“ / 100 - 50 - 10 µm in the circuits |
| Drying System | HotSpeed warm air |
| Drying temperature range | approx. 40 - 45 °C (104 and 113 °F) |
| Footprint | 1800 mm x 1100 mm (70.87″ x 43.31″) |
Downloads
Product InformationAF20
Compliance CertificatesREACH, PFAS etc.back
Not the ideal system for you?
