MultiEx® Rapid
Intensive flux remover
MultiEx® Rapid is especially designed for the cleaning in electronics manufacturing.
MultiEx® Rapid removes particularly flux residues.
MultiEx® Rapid is perfectly suited for the cleaning of assembled PCBs.
MultiEx® Rapid is a concentrate to be mixed with water to be operated in kolb PowerSpray® systems as well as all common spray-in-air. spray-in-immersion, air-in immersion (e.g. kolb AirFlow® systems) and ultrasonic cleaning systems.
MultiEx® Rapid reaches its best efficiency at amixing rate of 1:0 to 1:6 (standard 1:3) with tap water depending on contamination amount an age.
Technical data | |
|---|---|
| Phases | Single Phase |
| pH Value at 20 °C | 11.0 (alkaline) |
| Conductance at 20 °C | > 100 µS/cm |
| Application / Mixing Ratio | 1:3 |
| Application temperature | 30 °C - 60 °C |
| Flashpoint | > 100 °C |
| VOC content | < 20% |
Downloads
MultiEx® Rapid
554 KB
MultiEx® Rapid
REACH, PFAS etc.
back
This detergent is not perfect for you?
Share this page:
