AQUBE® M series

Up to four screens / stencils or 28 carriers in one cleaning cycle

The new kolb AQUBE® systems are next-generation cleaning systems - even more efficient, even more compact, easy to handle and maintain, pre-equipped for extended water management and ready for the smart factory (SF ready).

The systems of the AQUBE® M series offer process safe cleaning of up to four screens, PumpPrints or stencils in one cycle from contaminations like SMD-adhesive, SMD-paste, flux, oil, dust or grease or multi option systems for almost every requirement of maintenance cleaning such as the cleaning of solder carriers / masks, ESD boxes, magazines, pallets, machinery parts and other small parts from flux, oil dust and grease.

The two tank combi systems withtriple circuit function and a fully automatic 3 or 4step process (cleaning, MediumWipe®, rinsing, drying) and ClosedLoop water processing are extremely compact delivering best cost of ownership value.


AQUBE® MH5
Fully automatic tools cleaning system

Capacity: 7 carriers up to 540 x 480 mm, 21“ x 19“ or up to two drawer baskets for small parts
Horizontal spray rotor system, VMH®-Turbo evaporative drying
PolyPower® Technology (up to three times more pressure power and up to 30% less cycle time)
Process chamber dimensions: W 540 • D 590 • H 570 mm

more about AQUBE® MH5

AQUBE® MH7
Fully automatic "allround" tools cleaning system

Capacity: 11 carriers 710 x 580, 28" x 23" or 640 x 640 mm, 25" x 25" or up to three drawer baskets for small parts
Horizontal spray rotor system, VMH®-Turbo evaporative drying
PolyPower® technology (up to three times more pressure power and up to 30% less cycle time)
Process chamber dimensions: W 700 • D 720 • H 710 mm

more about AQUBE® MH7

AQUBE® MH9
XXL "all round" electronic manufacturing tools cleaning system

Capacity: 28 carriers up to 750 x 950 mm, 29.5" x 37.5" or up to four drawer inserts for small parts
Horizontal spray rotor system, VMH®-Turbo evaporative drying
Process chamber dimensions: W 970 • D 955 • H 900 mm

more about AQUBE® MH9

AQUBE® MV5 TWIN
Cleaning system for two screens, stencils or PumpPrints

Capacity: 2 stencils up to 520 x 520 mm, 20,5“ x 20,5“ or 560 x 490 mm, 22“ x 19“
Vertical fourfold spray rotors, CWA® compression drying
Cycle time: approx. 7 minutes
Process chamber dimensions: W 540 • D 590 • H 570 mm

more about AQUBE® MV5 TWIN

AQUBE® MV7 TWIN
Cleaning system for two sreens, stencils or PumpPrints

Capacity: 2 stencils up to 640 x 640 mm, 25“ x 25“ or 710 x 585 mm, 28“ x 23"
Vertical fourfold spray rotors, CWA® compression drying
Cycle time: approx. 5 minutes
Process chamber dimensions: W 700 • D 720 • H 710 mm

more about AQUBE® MV7 TWIN

AQUBE® MV8 sTWIN
Parallel or sequential cleaning of two stencils

Capacity: Two screens, stencils up to a size of 900 x 800 mm (35 "x 32") in two separate process chambers
Fully automatic 4step process: cleaning, MediumWipe®, rinsing and CWA® supercharger drying
Cleans stencils, screens, PumpPrint stencils, misprints from SMD adhesive, SMD paste, flux, oil, dust, grease

more about AQUBE® MV8 sTWIN

AQUBE® MV9 QUAD
Cleaning system for four screens, stencils or PumpPrints

Capacity: 4 screens / stencils 800 x 940 mm, 31,5" x 37"
Vertical eightfold spray rotors, CWA® supercharger compression drying
Relative cycle time: 4 minutes per stencil
Process chamber dimensions: W 970 • D 955 • H 900 mm

more about AQUBE® MV9 QUAD

Events

This year, kolb is again a participant in this renowned technology event.

Read more
More events

News

kolb keeps on strengthening its presence in Asia.

Read more

The new AQUBE® MV8 sTWIN and PSE 300 2VL were the attractions of the very well-attended fair booth.

Read more

kolb Asia Pacific and SiP Technology presented the new generation AQUBE® cleaning systems to the Asian market.

Read more
More news