Optimal cleaning of assembled PCBs (ultra fine cleaning), screens and stencils (fine cleaning) and production tools as solder carriers and solder pallets (maintenance cleaning) today is a prerequisite for reproducible quality as well as for low failure rates, resulting in high customer satisfaction.
In small and medium-sized companies, however, the volumes of the individual cleaning tasks are not so high, that they justify a paybackfor individual cleaning systems.
The German engineered and manufactured kolb PS300 2HY takes this into consideration also for smallest applicable quantities. It is a full hybrid system with ClosedLoop water reprocessing that not only cleans screens, stencils and misprints, but can also take on ultra fine and even maintenance cleaning tasks.
|Technology base||kolb PowerSpray®|
|Cleaning capacity per process||Screens, stencils / (PCB-) carriers up to a size of 780 x 950 mm (31 "x 37.5")|
|Process chamber dimensions||W 350 • D 980 • H 920 mm|
|Volume tank A||75 l|
|Volume tank B / C||35 - 75 l|
|Power supply||400 V AC 16 A CEE / 3Ph / 50 or 60 Hz|
|Power consumption||3.8 kW|
|Control system||PLC (EATON)|
|Temperature load||up to 55° C (basic system), up to 80° C (HT-version)|
|Drying control range||approx. 45° - 120° C|
|Filtration||up to three stage - 1. Full flow coarse filter < 2 mm, 2. Cascaded sediment filter inside the tank, 3. 20“ fine filter (1 - 100 µm - process dependent)|
|Supply connection 1 (tap water)||3/8", hose connection 14 mm|
|Supply connection 2 (DI water)||3/8", hose connection 14 mm|
|Supply connection 3 (compressed air)||6 - 8 bar (100 l / min) for HT-version and MediumWipe®|
|Rinse water drain connection||3/4", hose connection 25 mm|
|Exhaust connection||160 mm Ø > 200 - 300 m³ / h|
|Footprint||800 x 1.500 mm|
|Operating noise||63 dB (A)|
|Empty weight||440 kg|