Accessory program (excerpt) Accessory Program ▪ PAGE 20 Washing Carriers & Frames kolb offers a whole range of tailored frames and carriers for PCB, misprint, stencil and parts cleaning. Our adapter washing frames securely hold e.g. frameless stencils, DEK VectorGuard and LaserJob stencils as well as misprinted boards, PCBs, PCBAs, squeegees and scrapers. For more information visit https://www.kolb-ct.com/systems/extras/washing-frames. SpeedLoad Carts Stainless steel set-up carts for the transport of SlideIn Quick Load inserts within a production area. They allow faster and easier transport when the load unit baskets cannot be loaded in the immediate vicinity of the cleaning system. The cart fits exactly to the size of the corresponding machine, so that the complete loading unit can be easily and smoothly pushed into the cleaning chamber. For more information visit https://www.kolb-ct.com/product/accessory-speedload-carts SlideIn Quick Load Inserts Speed loading slide in units with two, three or four drawer baskets. The drawer baskets can be loaded outside of the cleaning system, which facilitates handling. If two units are in use, one can be loaded while a filled one runs through a cleaning cycle in the machine. The loading and unloading then requires only minimal system downtime, since the loaded units can be completely slid in and out. For more information visit https://www.kolb-ct.com/systems/extras/options. Electronic Rotor Run Control To monitor correct rotor operation in closed kolb AQUBE® and PSE systems. The rotor run control option checks the functioning of the rotors electronically, to prevent rotor damage e.g. because of loading mistakes or slipped products. Built-in sensors at each half turning of each rotor send a signal to the PLC. For more information visit https://www.kolb-ct.com/product/accessory-electronic-rotor-run-control. Rotor QuickConnect QuickConnect is a quick-release rotor clamping system. The horizontal center rotors of a kolb cleaning system can be installed or removed within a few seconds. If goods to be cleaned require more headroom than the normal rotor arrangement allows, the center rotors can be easily removed. The rotors for smaller goods to be cleaned can be installed again just as quickly, which guarantees the optimum flexibility of the cleaning chamber. For more information visit https://www.kolb-ct.com/product/accessory-rotor-quickconnect. Decalcification Unit Ensuring required tap water quality for the rinse circuit. In the case of systems connected to a tap water supply on site, whose water quality of which does not correspond to the required < 10 °dH or < 350 µS/ cm conductivity value, the water quality required for the rinsing process can be produced by the decalcification unit. By means of the ball valve above the cartridge, the blend between the city water and the treated (decalcified) water is adjusted. For more information visit https://www.kolb-ct.com/product/product/option-decalcification-unit
RkJQdWJsaXNoZXIy MjI1MTM3NQ==