Thorough, fast and protective paint stripping
We offer the complete process from one manufacturer

In the electronics industry today, coating carriers or conformal coating system components are usually still cleaned manually - laborious, time-consuming and costly and usually with gradual mechanical damage to the product to be cleaned. In general, coating residues must be permanently removed from the product carriers used and/or in the equipment itself to ensure a qualified coating process.

Professional paint stripping can generally be divided into chemical and mechanical processes.

Above all, mechanical paint stripping by means of blasting processes, thermal oxidative immersion processes / moving bed processes, purely thermal processes or manual removal of paint layers is usually time-consuming and labor-intensive. Other (costly) physical processes include cryogenic paint stripping (e.g. for very heat-sensitive workpieces) or paint stripping with laser light.

The chemical processes are traditionally carried out with usually water-based alkaline paint strippers with very high pH values and high temperatures (up to 150 °C). Classic solvents are hardly used any more. Due to the high health risk posed by the chlorinated hydrocarbons they contain, they may now only be used in industrial plants under strict conditions, according to the REACH regulation.

This means that traditional chemical paint stripping is generally very harmful to people and the environment and also usually requires long process times. In addition, the use of high temperatures with rising energy costs reduces economic efficiency.

Innovative economical processes of paint stripping
State of the art alternatives to manual paint stripping

kolb offers in the field of chemical and mechanical-chemical paint stripping innovative complete applications and processes from one source, which are economically and environmentally future-proof.

With the right combination of technical equipment and chemistry paint stripping becomes an independent process, almost without personnel efforts.

And this is achieved by using a pH-neutral chemistry that is classified as non-hazardous and works thoroughly and quickly at comparably low temperatures.

Two machine-based processes which, depending on the requirements, provide an optimal economical solution for manufacturing companies working with coating systems.

Both processes remove parylene coatings, epoxy resins, acrylic paints, synthetic resin paints, nitro paints, two-component paints, UV paints, powder coatings and polyurethanes.

Application 1: Chemical paint stripping with a pH-neutral, homogeneous special machinery paint stripper.

Application 2: Sealing of the cleaning material and cleaning of the paint residues adhering to the sealant.

1. Chemical paint stripping as an efficient machine cleaning process
The kolb turn-key solution

kolb offers a machine process for fast and thorough paint stripping as a turnkey solution from one manufacturer source consisting of cleaning system, paint stripper and individually programmed process control.  As cleaning systems here all kolb AQUBE® and PSE MH PowerSpray® pressure spray-in air systems can be considered. They are operated for varnish and coating cleaning with the homogeneous paint stripper kolb RemoCoat® SG, especially developed for paint stripping tasks in the electronic industry (Product information and Safety data sheet).

The cleaning spectrum covers almost all common types of paint / varnish and carrier materials. The process window allows best results at low cleaning temperatures of well below 60 °C, which have never been reached in paint stripping before.

The special cleaning agent RemoCoat® SG attacks the binder layer of the paint, which then disintegrates. The cleaned paint residues can then simply be filtered out of the homogeneous (no phase separation) paint stripper.

Due to the special 4Step process (cleaning, drying, rinsing with tap water, drying) not only is the paint stripped product completely clean, but the residues remain as dry powder that can be easily disposed of from the filter with which all paint cleaning systems are equipped.

Depending on the product characteristics of the varnish and the age of the paint residues as well as the material properties of the good to be cleaned, the electronic process control is adjusted in detail so that the entire process then runs stably and reproducibly automatically at the touch of one button.

A precise process analysis is therefore always advisable in advance to find the best possible combination of machine, detergent, coating used and product to be cleaned.

Suitable kolb cleaning systems for the removal of coating residues

All MH systems of the kolb PSE M series

Eco­nomy tools clea­ning sys­tems for sol­der car­riers, pal­lets, trays and in its high tempe­rature ver­sion per­fect­ly suited for the clea­ning of con­for­mal coa­ting carriers
4Step process (clea­ning / dry­ing / rin­sing / dry­ing) with VMH® hot air eva­­po­ra­­tive dry­ing
Capa­cities
PSE MH7: 11 car­riers up to 710 x 580 mm (28“ x 123“) or up to three drawer bas­kets for small parts
PSE MH5: 7 carriers up to 480 x 430 mm (19“ x 17“), boxes / racks up to 540 x 590 x 570 mm or up to two drawer bas­kets
Pro­­cess cham­­ber dimen­­sions
PSE MH7: W 700 • D 720 • H 710 mm (W 27.55" • D 28.34" • H 27.95")
PSE MH5: W 540 • D 590 • H 570 mm (W 21.25" • D 23.22" • H 22.44")

More information
All MH systems of the kolb AQUBE® M series

State of the art tools and parts clea­ning systems for sol­der car­riers, pal­lets, trays and in its high tempe­rature ver­sion per­fect­ly suited for the clea­ning of con­for­mal coa­ting carriers
4Step process (clea­ning / dry­ing / rin­sing / dry­ing) with VMH® hot air eva­­po­ra­­tive dry­ing
Capa­cities
AQUBE® MH9: 14 carriers up to 950 x 750 mm (37.5“ x 29.5“), boxes / racks up to 970 x 955 x 900 mm or up to four drawer baskets for small parts, filters etc
AQUBE® MH7: 11 car­riers up to 710 x 580 mm (28“ x 123“) or up to three drawer bas­kets
AQUBE® MH5: 7 carriers up to 480 x 430 mm (19“ x 17“), boxes / racks up to 540 x 590 x 570 mm or up to two drawer bas­kets
Pro­­cess cham­­ber dimen­­sions
AQUBE® MH9: W 970 • D 955 • H 900 mm (W 38.18" • D 37.59" • H 35.43")
AQUBE® MH7: W 700 • D 720 • H 710 mm (W 27.55" • D 28.34" • H 27.95")
AQUBE® MH5: W 540 • D 590 • H 570 mm (W 21.25" • D 23.22" • H 22.44")

More information

2. Mechanical-chemical paint stripping through pre-sealing
For coating carriers / product carriers or for chamber parts of coating systems

kolb CarrierSeal® is a liquid sealant for painting carriers / product carriers or for the chamber parts of conformal coating systems. Varnish / coating residues, which normally stubbornly adhere directly to the tools or in the chamber, can be removed by simple manual peeling and/or machine cleaning of the sealing film applied before the coating process.

If sealed coating carriers or chamber parts are so heavily contaminated with coating residues that optimal function is no longer guaranteed, these residues can be quickly removed by simply peeling off the CarrierSeal® sealant. This manual removal is particularly advantageous for previously sealed parts of a coating system.

The CarrierSeal® sealant can also be cleaned even more easily by machine in a suitable electronic cleaning system. The carrier contaminated with paint residues is fixed in a washing frame for machine cleaning. This is very efficient and even more time-saving, especially for coating carriers with lots of superstructures.

For machine cleaning it is recommended to use a pressure spray system with vertically working rotors, in which normally stencils or PCBAs are cleaned. It is advantageous if the system has a warm or hot air drying function. However, it is also possible to use systems with horizontally arranged rotors and/or systems with compressor drying.

An optimal suitable system is e.g. the kolb PSE 300 HD single tank economy system for stencil cleaning. Further suitable systems are available on request or result from corresponding analyses of your specific paint stripping requirements.
The cleaning time e.g. in a PSE300 HD system with kolb MultiEx® N7 neutral cleaner as cleaning and rinsing medium is approx. 30 minutes. With a higher equipped system this time can be shortened even more.

CarrierSeal® is ESD-safe (on ESD-safe surfaces), biodegradable and does not contain microplastics.

More information about kolb CarrierSeal®

Sealing of the coating substrate with CarrierSeal®

Sealing of machine parts prior the coating process

Remo­val of the sea­­ling and pro­cess de­stabi­lizing coa­ting resi­dues

Option: Ma­chine clea­ning of the sea­ling in a carrier-washing frame

It's all about the process

Which technology is the fastest and most cost-effective for you depends on a number of factors that need to be considered carefully before implementing a process chain. The first step is to define the product parameters (paint properties, material properties, degree of contamination, etc.) in order to then optimally design and set up the machinery process comprising machine, chemistry, temperature, time and software.

The aim is to remove coating residues from tools and machine parts as quickly as possible with a minimum of personnel and manual work and to have them ready for use again.

Our qualified and well-equipped technical centre and analytical laboratory will help you to achieve this. Make an appointment with us at any time at info@kolb-ct.com or by phone: +49 2154 9479-65.

Events & News

Next Events
Event picture for APEX in the USA

IPC APEX EXPO 2024 | Anaheim, USA

Meet us and our partner A-Tek Systems Group in Anaheim!

Read more »
Next Events
Event picture for EPP in Leinfelden, Germany

EPP InnovationsFORUM 2024 | Leinfelden, Germany

Meet us in Leinfelden!

Read more »
Top News
Composing mit grauen, recyclebaren Kanistern

Sustainability at kolb - now also for our containers

Learn more on how we improved our detergent containers.

Read more »
Top News
Award ceremony

kolb wins first place as a family-friendly company

Read here what the jury particularly liked about kolb

Read more »