For maintenance cleaning with AirFlow®-Technology and PulseFlow®- Technology. Cleans flux management units as well as solder carriers / frames from flux residue, condensate, oil, dust, grease etc.
The advantages of AF09 Single
- Plug & Work System (connect, fill, start).
- High cleaning efficiency.
- Short cycle times (15 / 30 / 45 minutes, cycle times freely selectable via PLC).
- No explosion protected area necessary.
- Easy to transport – use directly at the soldering machine possible.
- Cleaning of cyclones / containers is possible without dismounting them from the reflow-soldering system.
- 2-stage cleaning detergent, rinsing and active drying is obsolete.
- Skimmer filtration with pre-installed exhaust.
- Permanent 3-stage filtration.
- Robust stainless steel framework.
- Process chambers made of PVC, i.e. no electrolysis possible at weld seams.
- Integrated retention pond for external cleaning or adapter storage.
The service- and security features of AF09 Single
- PLC control and monitoring of cleaning process and maintenance intervals.
- Filter pressure control by PLC.
- Emergency reset switch.
- Full CE-conformity.
- Automatic shut-down with open cleaning system.
The general maintenance of AF09 Single
- Change of the saturated cleaning detergent mixture as per individual requirements.
- Cleaning of coarse filter, change of fine filters.
System must be operated only with qualified 2-stage cleaning detergents!
Technical data
- Main power supply: 400 V AC, 16 A CEE; 50 / 60 Hz
- Power dissipation: approx. 1,5 kW
- Ambient temperature (min): approx. 20°C
- Noise: < 65 dB (A)
- Compressed air supply: approx. 6-10 bar, 110 / l min
- System weight: approx. 300 kg (empty), 500 kg (filled)
- Process chamber capacity: approx. 200 l (cleaning detergent mixture)
- Max. product size: 900 mm x 450 mm x 310 mm (L x B x H)
- System dimension: L 1.250 mm, W 800 mm, H 1.000 mm, open lid 1.500 mm



