Files for Download

For maintenance cleaning with AirFlow^®-Technology. Cleans flux management units as well as solder carriers / frames from flux residue, condensate, oil, dust, grease etc.

The advantages of AF08 Single

• Plug & Work System (connect, fill, start).
• High cleaning efficiency.
• Short cycle times (15 / 30 / 45 minutes, cycle times freely selectable via PLC).
• No explosion protected area necessary.
• Easy to transport – Use directly at the soldering machine possible.
• 2-stage cleaning detergent, rinsing and active drying is obsolete.
• Skimmer filtration with pre-installed exhaust.
• Permanent 3-stage filtration.
• Robust stainless steel framework.
• Process chambers made of PVC, i.e. no electrolysis possible at weld seams.

The Service- and security features of AF08 Single

• PLC control and monitoring of cleaning process and maintenance intervals.
• Filter pressure control by PLC.
• Full CE-conformity.
• Automatic shut-down with open cleaning system.

The general maintenance of AF08

• Change of the saturated cleaning detergent mixture as per individual requirements.
• Cleaning of coarse filter, change of fine filters.

System must be operated only with qualified  2-stage cleaning detergents!

Technical data:

• Main power supply: 400 V AC, 16 A CEE; 50 / 60 Hz
• Power dissipation: approx. 1,5 kw
• Ambient temperature (min): approx. 20°C
• Noise: < 65 dB (A)
• Compressed air supply: approx. 6-10 bar, 110 / l min
• System weight: approx. 300 kg (empty), 500 kg (filled)
• Process chamber capacity: approx. 200 l (cleaning detergent mixture)
• Max. product size: 900 mm x 450 mm x 310 mm (L x B x H)
• System dimension: L 1.250mm, W 800mm, H 1.000mm, open lid: 1.500 mm