- click to enlarge
Files for Download
There are 1 files.
AF08 4Mod TI EN (294.25 kb) Information - AF08 4Mod
With AirFlow®-Technology. Cleans flux management units as well as solder carriers / frames from flux residue, condensate, oil, dust, grease etc.
The advantages of AF08 4M
- Plug & Work System (connect, fill start).
- High cleaning efficiency.
- Short cycle times (15 / 30 / 45 minutes, cycle times freely selectable via PLC).
- No explosion protected area necessary.
- Cleaning module 1.
- Cleaning module 2 (different products or a different cleaning detergent).
- Rinse module for rinsing with water.
- Drier module with 4-way HotSpeed unit.
- Skimmer filtration with pre-installed exhaust.
- Permanent 3-stage filtration.
- Robust steel framework.
- Process chambers made of PVC, i.e. no electrolysis possible at weld seams.
The service- and security features of AF08 4M
- PLC control and monitoring of cleaning process and maintenance intervals.
- Filter pressure control by PLC.
- Full CE-conformity.
The general maintenance of AF08 4M
- Change of the saturated cleaning detergent mixture as per individual requirements.
- Cleaning of coarse filter, change of fine filters.
System must be operated only with qualified 2-stage cleaning detergents!
Technical data
- Power supply/power dissipation: 400 V AC, 16 A CEE; 50 / 60 Hz approx. 5,5 kW
- Ambient temperature (min): approx. 20 °C
- Noise: < 65 dB (A)
- Compressed air supply: approx. 6-10 bar, 110 / l min.
- System weight: approx. 910 kg (empty), 1570 kg (filled)
- chamber contents: M1 approx. 220l, M2+M3 approx. 320l
- Max. product size: 900 mm x 450 mm x 310 -610 mm (L x B X H)
- System dimension: L 2.600mm, W 1.250 mm, H 1.000 mm
- click to enlarge
Files for Download
There are 1 files.
AF08 4Mod TI EN (294.25 kb) Information - AF08 4Mod