Fully automatic hybrid system, a, able to operate two different processes in two fully separate cycles: Fine cleaning of screens / stencils (2 screens per cycle) or misprints as well as maintenance cleaning of solder frames, carriers, magazines, filter steel sheets, etc.

The advantages of PSB100 V70

• Capacity: 2 screens / stencils 640 x 640 mms (25“ x 25“) or 710 x 583 mms (28“ x 23“) (suitable for the efficient cleaning of PumpPrints) or 7 - 10 solder carriers per cycle.
• Automatic process detection when stencils are loaded.
• Comfortable push-one-button operation.
• Three tank system with three separate circuits.
• Fully automatic 4step process: cleaning, MediumWipe®, rinsing, compression® drying.
• Fine filter system 10µm for the cleaning circuits tank A and tank B.
• Water-free operation possible: Due to the separate three tank configuration the system can operate with suitable cleaning / rinsing detergents for rinsing.
• Small parts cleaning in a suitable wash cart.
• Vertical (fine cleaning) and horizontal rotor system (maintenance cleaning)
• Permanent rotor run control as an option.
• Process and service intervals SPS controlled.
• Event issuing and software control via touch screen.
• SPC data recording and importing by scanner possible.
• Made of stainless steel, process sections are made of electrolysis resistant elements.
• Installation close to the production line possible; no special protection required.
• Extremely compact: 1,6 qm floor space required.
• All safety relevant devices are standard features in the basic system configuration.

Technical data

• Process chamber dimension: W 700 ▪ D 710 ▪ H 720 mms
• Capacity: 2 screens / stencils 640 x 640 mms (25“ x 25“) or 710 x 583 mms (28“ x 23“) or 7 - 10 solder carriers
• Power supply: 400 V AC 16 A CEE / 3Ph / 50 or 60 Hz
• Power consumption / control system: approx. 4,1 kW / PLC (EATON)
• Ambient Temperature (min./max.): approx. 20°C / 40°C
• Tank contents cleaning: Tank A: 50 l
• Tank contents rinsing incl. saving step: Tank B: 50 l / Tank C 110 l
• Compressed air connection: 6-8 bar (100 l / min.) MediumWipe® process
• Exhaust connection (prov. by customer): 160 mm Ø > 200 to 300m3 per hour
• Connection water supply (tap-, DI-water): 3/8", hose connection 14 mms
• Connection water supply (DI/VE water): 3/8", hose connection 14 mms (or bridging to tap water)
• Connection rinse water drain: 3/4", hose connect. 25 mms with integrated pump out system
• Noise: 74 dB (A)
• Weight: 530 kg